- Out-of-Stock
This system is highly appreciated in the industry as it avoids having rails on the ground that hinder the movement of forklifts or the passage of motorized vehicles with small diameter wheels. Very practical in campgrounds to facilitate the passage of caravans.
This model corresponds to the reference 9972S from MANTION and is the strongest model in this range for gates with an opening starting from 9.5 meters in length and a total height from the ground between 1.30 and 2 meters.
This reference will interest you either in the context of a manufacturing from A to Z, or in the replacement of a part already in place on an existing and worn-out gate.
These parts are designed for use of about 20 maneuvers per day. Please contact us for any exceedance.
The design of the gate must be robust and made of sufficiently thick steel to prevent any bending of the entire structure. The bottom beam of the gate must have a minimum dimension of 180x80x4 mm in thickness.
The vertical frames should be 80x80x3 mm, the same for the diagonal reinforcements. The top beam should be 160x80x4 mm. If you wish, we can assist you in configuring your gate using a software designed for this purpose.
The maximum weight of the gate must not exceed 1100 kilograms. We can also provide you with the corresponding rail under reference MANTION 9070 in galvanized steel or raw black steel to be painted. The length of the available rails ranges from 3 to 9 meters with a unit mass of 135 kg for the largest dimensions.
You might also like