This lever castor will allow you to easily lift very heavy objects with minimal effort. The effort required by hand is very low compared to the lever arm.
The advantage, compared to a steel wheel, lies in the fact that it does not damage the floor.
It will be possible to lift several hundred kilos by normally pressing on the lever by hand.
Using the 16 mm diameter, 368 mm long crowbar included in the kit, lift your box or machine and then slide the castor in from the side. It is not strictly necessary to screw the kit onto the object to be moved; you can simply strap the castors together if they are placed flat.
To leave the castor in place permanently, it should be fixed to the support using two M8 screws underneath.
The wheels are very robust with injected nylon rims and overmolding of a red trace-free polyurethane band. This allows rolling on tiles or parquet without damaging the floor.
Once the castor is in place under your furniture, it will lift it by a minimum of 12 mm, considering the thickness of the steel.
Once the lever is in place and activated, it will add another 33 mm of height, reaching a total height of 45 mm from the ground.
Therefore, this data must be taken into account to be able to pass under doors. For example: I want to move a wardrobe that is 190 cm high and pass through a door without a threshold that is 203 cm high. I add 4.5 cm to reach a moving height of 194.5 cm.