Castor OF SPRING LOADING PIVOTING GATE STRONG LOAD DIAMETER 150 MM LOAD 350 KG
  • Castor OF SPRING LOADING PIVOTING GATE STRONG LOAD DIAMETER 150 MM LOAD 350 KG
  • Castor OF SPRING LOADING PIVOTING GATE STRONG LOAD DIAMETER 150 MM LOAD 350 KG
  • Castor OF SPRING LOADING PIVOTING GATE STRONG LOAD DIAMETER 150 MM LOAD 350 KG
  • Castor OF SPRING LOADING PIVOTING GATE STRONG LOAD DIAMETER 150 MM LOAD 350 KG
How to choose your roulette?

HEAVY DUTY SWIVEL SPRING-LOADED GATE CASTOR DIAMETER 150 MM LOAD 85 TO 250 KG WITH 20MM OFFSET

€99.98 Tax included

REF: 99302

This castor with polyurethane coating and cast iron rim will help compensate for the heavy weight of a swing gate. The vertical travel is minimal (20 mm maximum) at the spring, but it will absorb a gravel or a floor bump. To compress the spring to 50% of its stroke (i.e., 10 mm), a force of 85 kilos must be applied, and to compress it to 100%, a force of 245 kilos (20 mm of travel) must be applied.

The plate to be screwed or welded onto your gate is offset from the wheel. This means that the castor can rotate 360 degrees completely without touching the gate. We have compensated for this significant overhang with reinforced welds and steel thicknesses of 6 mm. This plate has 6 fixing holes. For fixing, we recommend passing through with a bolt and securing it with a nut on the other side. However, simple self-drilling screws may suffice if the total load is not too high. The assembly has a greaser, which will help protect the ball crown of the castor.

The maximum footprint once fixed and the castor rotated to its maximum is 275 mm.

We can, of course, manufacture this model to any dimension.

The compression spring has spaces between the coils when it is not loaded. The distance between the coils decreases when the spring is loaded and compressed. In principle, a compression spring should never be compressed to the point where the coils touch. Its lifespan would be significantly shortened. The ideal solution is to use 60% of the maximum force and maximum stroke. A compression spring should never serve as a physical stop.

Expédition sous 24h ouvrées

Payment Secure
Add to Compare Remove from Compare

Technical sheet

  • Diameter of the wheel in mm 150

  • Load capacity in kilograms 250

  • Material of tread Polyurethane

  • Type of bearing Bearing ball bearings

  • Type fixation Pivoting to plate (plate)

  • Height castor in mm 380

  • Specificities Strong load

  • Dimension plate in mm 80x180

  • Distance center distance in mm 52x140

  • Fixation diameter in mm M10

  • Width of the wheel in mm 50

  • Width of the tread in mm 50

  • Offset in mm 55

  • Dimensions in mm 275

  • Maximum speed in km/h 4

  • Minimum / Maximum Temperature in °C -20/+80

  • Weight 5.904 Kg

You might also like

Castor SPRING LOADER FOR LADDER LOCK DIAMETER 50 MM FIXED LOAD 9.5KG TO 20KG WITH 30MM OF TRAVEL - STOPROLL 50 F • Caujolle
  • Diameter of the wheel in mm 50
  • Load capacity in kilograms 40
  • Material of tread Rubber
  • Type of bearing Bearing ball bearings
  • Type fixation Fixed to plate
  • Height castor in mm 155
  • Specificities Non-staining
  • Dimension plate in mm 60x50 translates to "60 times 50" in English.
  • Distance center distance in mm 45 times 40 equals 1800.
  • Fixation diameter in mm M5
  • Width of the wheel in mm 17
  • Length of the hub in mm 20
  • Width of the tread in mm 14
  • Maximum speed in km/h 4
  • Minimum / Maximum Temperature in °C -20/+80
Add to Compare Remove from Compare
Details
handling-and-industry-castor-wheels

Castor SPRING LOADER FOR LADDER LOCK DIAMETER 50 MM FIXED LOAD 9.5KG TO 20KG WITH 30MM OF TRAVEL - STOPROLL 50 F

Castor fixed with a spring, 50 mm in diameter
€14.99 Price