PAIR OF LIFTING PULLEYS FOR 12 MM MAXIMUM DIAMETER ROPE 90 MM 3 PULLEYS
  • PAIR OF LIFTING PULLEYS FOR 12 MM MAXIMUM DIAMETER ROPE 90 MM 3 PULLEYS
  • PAIR OF LIFTING PULLEYS FOR 12 MM MAXIMUM DIAMETER ROPE 90 MM 3 PULLEYS
  • PAIR OF LIFTING PULLEYS FOR 12 MM MAXIMUM DIAMETER ROPE 90 MM 3 PULLEYS
  • PAIR OF LIFTING PULLEYS FOR 12 MM MAXIMUM DIAMETER ROPE 90 MM 3 PULLEYS
How to choose your roulette?

PAIR OF LIFTING MITTS FOR 12 MM MAX DIAMETER ROPE 90 MM LOAD 500 KG

€169.98 Tax included

REF: 24775

This pair of lifting blocks is ideal for very heavy handling up to 500 kg in total vertically.

Each block is rated for a maximum load of half a ton, but you cannot add these loads together if the lifting is done vertically.

However, you can move 1000 kg horizontally, such as to pull a car out of a ditch or a farming machine stuck in a field.

Once the rope is passed through each pulley, the force to be applied will be divided by the number of pulleys present.

If your hoist has 6 pulleys, you will divide the effort by 6. There is, of course, a friction coefficient to apply to the entire setup of around 0.1 per pulley.

You should achieve a multiplication factor of around 5 once the friction forces are taken into account. For rigging this hoist, simply tie a bowline knot on the ring on one of the two blocks first. Then thread the rope through the pulley of the opposite block and make back-and-forth movements.

Product made entirely of steel with hot-dip galvanized sheaves.

Expédition sous 24h ouvrées

Payment Secure
Add to Compare Remove from Compare

Technical sheet

  • Diameter of the wheel in mm 90

  • Load capacity in kilograms 500

  • Type of bearing Plain bore hub

  • Profile type Round

  • Maximum speed in km/h 4

  • Weight 7.740 Kg