FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
  • FOOT PROTECTOR FOR WHEELS WITH A DIAMETER OF 160 AND 200 MM - FOOT PROTECTOR 160/200
How to choose your roulette?

PROTEGE PIEDS POUR ROULETTES DE DIAMETRE 200 MM - PROTEGE PIED 200

€13.99 Tax included

REF: 86256

This foot protector is intended for professionals concerned about preventing workplace accidents.

Indeed, this item prevents rolling over an operator's foot once equipped, if they are not attentive or if the cart is going downhill without being able to stop. The gap between the ground and the protection is too narrow to allow a shoe to pass. The entire coating is made of galvanized steel. This model is compatible with most of our castors with diameters of 160 and 200 mm. Depending on the diameter of your wheel, you have two possible heights for the piece.

If you already have the castor and wish to equip your fleet, you just need to check that the outer width between the forks of the castors at the hub is between 70 mm and 75 mm. You must also ensure that the bolt is a maximum of 12 mm. If that is the case, you will have no trouble installing it.

The thickness of the steel is 2 mm.

Expédition sous 24h ouvrées

Payment Secure
Add to Compare Remove from Compare

Technical sheet

  • Diameter of the wheel in mm 200

  • Material of the tread Steel

  • Height castor in mm 97

  • Diameter of the fixing in mm. M12

  • Length of the hub in mm 70

  • Maximum speed in km/h 4

  • Weight 0.500 Kg