KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
  • KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
  • KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
  • KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
  • KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
  • KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE
How to choose your roulette?

KIT TO CONVERT A Castor TO Bolt hole OF 10 MM INTO Castor WITH ANGLE

€9.98 Tax included

REF: 99283

This angle bracket allows you to transform most casters with a eye of 10 mm into a 10 mm angle-mounted caster.

To do this, simply place the angle bracket on top of your eye caster and screw it in with the provided hardware (non-loosening nut). The 20 mm long bolt fits inside the angle bracket and the nut fits inside the cup of the caster.

Screwing requires a bit of dexterity using a 4 mm Allen key and a 17 mm open-end wrench.

We provide a bag containing 3 wood screws, each 20 mm long and 5 mm in diameter.
Once installed, this kit only raises your setup by 7 mm (height of the caster to be added).

This kit is suitable for wooden furniture thanks to the provided hardware, but also for all sizes of square tubes; you can indeed drill the angle bracket anywhere using a metal drill bit or a self-tapping screw.

This allows you to put some furniture without a base on casters.

WARNING: this kit does not include the caster

 

 

Expédition sous 24h ouvrées

Payment Secure
Add to Compare Remove from Compare

Technical sheet

  • Type fixation Fixation d'angle à cornière

  • Dimension plate in mm 42x42 equals 1764.

  • Diameter of the fixing in mm. M5

  • Rod diameter in mm 10

  • Maximum speed in km/h 4

  • Weight 0.112 Kg

You might also like